System Settings (General); Accessing The System Settings (General) - Sharp MX-4100N Operation Manual

SYSTEM SETTINGS (GENERAL)

This section describes the system settings that can be configured by general users of the machine.

Accessing the System Settings (General)

JOB STATUS PRINT
SYSTEM
SETTINGS IMAGE SEND
HOME
System Settings
Total Count
Paper Tray
Settings
Printer Condition
Settings
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see
"1. BEFORE USING THE MACHINE".
Downloaded From ManualsPrinter.com Manuals
READY
DATA
LINE
DATA
LOGOUT
Admin Password
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
Make sure that the machine is in the standby state and
then press the [SYSTEM SETTINGS] key on the
operation panel.
When the [SYSTEM SETTINGS] key is pressed, the
following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure.
Exit
For detailed explanations of each of the settings, see the
following pages of this chapter.
"USER
7-5
SYSTEM SETTINGS
AUTHENTICATION" (page 1-17) in
Contents