Sharp MX-4100N Operation Manual page 526

Hide thumbs Also See for MX-4100N:
Table of Contents

Advertisement

Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one
page, go to step 7. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission
will begin. Go to step 8.
Do not disconnect the USB memory until "Sending data has been completed." appears in the touch panel.
• To scan in full colour, press the [COLOUR START] key. To scan in black and white, press the [BLACK & WHITE
START] key. If the colour mode of the [COLOUR START] key is set to [Auto], the colour of the original will be
5
detected automatically and scanning in full colour, greyscale or Mono2 will take place.
• If Encrypt PDF is selected for the file format ([PDF] is selected in the format settings screen and the [Encry.]
checkbox is set to
Touch the [Entry] key to open the keyboard screen, enter a password (maximum of 32 characters), and touch the
[OK] key. The recipient must use the password entered here to open the Encrypt PDF file.
To cancel Encrypt PDF, touch the [Cancel] key. The format settings screen will appear to let you change the file
type. Select a new file type and press the [START] key to begin transmission.
If the original was placed on the document glass, replace it with the next original
6
and press the [COLOUR START] key or the [BLACK & WHITE START] key.
Repeat until all originals have been scanned.
Place next original.
Press [Start].
When finished, press [Read-End].
7
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
• The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original
page scanned. However, when "Card Shot" is selected in the special modes, only the exposure can be changed
when scanning an even-numbered original page.
Downloaded From ManualsPrinter.com Manuals
), you will be prompted to enter a password when you press the [START] key.
Please enter encrypt PDF
password.
(Pg.No.x)
Configure
Read-End
5-37
SCANNER/INTERNET FAX
Cancel
Entry
Touch the [Read-End] key.
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
Contents

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents