Sharp MX-4100N Operation Manual page 709

Speaker Volume Setting
• Receive Signal
• Communication Error Signal
Original Print on Transaction Report
Transaction Report Print Select Setting
• Single Sending
• Broadcasting
• Receiving
Activity Report Print Select Setting
• Auto Print at Memory Full
• Print Daily at Designated Time
Body Text Print Select Setting
Pre-Setting Mail Signature
I-Fax Send Settings
I-Fax Reception Report On/Off Setting
I-Fax Reception Report Request Timeout Setting
Number of Resend Times at Reception Error
Maximum Size of E-mail Attachments
Rotation Sending Setting
Printing Page Number at Receiver
Recall in Case of Line Busy
Recall in Case of Communication Error
I-Fax Receive Settings
Auto Receive Reduce Setting
Duplex Reception Setting
Set Address for Data Forwarding
• Direct SMTP
• Add Hostname or IP Address Too
• Hostname or IP Address
Letter Size RX Reduce Print
Receiving Date & Time Print
POP3 Communication Timeout Setting
Reception Check Interval Setting
I-Fax Output Setting
Allow/Reject Mail or Domain Name Setting
*1 When the Internet fax expansion kit is installed.
*2 When the facsimile expansion kit is installed.
*3 When network connection is enabled.
Downloaded From ManualsPrinter.com Manuals
Item
7-38
SYSTEM SETTINGS
Factory default setting
–
Middle
Middle
Print Out Error Report Only
Print Out Error Report Only
Print Out All Report
No Printed Report
Disabled
Disabled
Disabled
Disabled
Disabled
1 hour
2
Unlimited
All Enabled
Enabled
Times: 2, Interval 3 min.
Times: 2, Interval 3 min.
Enabled
Disabled
–
Disabled
Disabled
–
Disabled
Disabled
60 sec.
5 min.
Varies depending on the machine
configuration
All Invalid
Page
7-82
7-82
7-82
7-83
7-83
7-83
7-83
7-83
7-83
7-83
7-83
7-84
7-84
7-84
7-84
7-84
7-84
7-84
7-84
7-85
7-85
7-85
7-85
7-85
7-85
Contents