Placement Orientation Of The Original; Automatic Reduction Of The Transmitted Image - Sharp MX-4100N Operation Manual

PLACEMENT ORIENTATION OF THE ORIGINAL

When an A4 (8-1/2" x 11") original is placed in vertical orientation (
and transmitted in horizontal orientation (
is transmitted in that orientation (
A4 (8-1/2" x 11")
A4R, B5 and A5 (8-1/2" x 11"R and 5-1/2" x 8-1/2") size originals are not rotated for transmission.
System Settings (Administrator): Rotation Sending Setting
The factory default setting is rotate before transmission. If this setting is disabled, the original will be transmitted in the
orientation in which it is placed.
AUTOMATIC REDUCTION OF THE TRANSMITTED
IMAGE
If the width of the transmitted image is larger than the width of the paper in the receiving machine, the image will be
automatically reduced to fit the receiving machine's paper width.
Example: Reduced sizes and reduction ratios
Transmitted image
width
A3
A3 (11" x 17")
B4
System Settings (Administrator): Auto Reduction Sending Setting
The factory default setting is automatic reduction enabled. If this setting is disabled, the image will be sent at full size and part
of the image may be cut off.
Downloaded From ManualsPrinter.com Manuals
) (Rotation Sending). If the original is placed in horizontal orientation (
) without being rotated.
Rotated to A4R (8-1/2" x 11"R)
orientation
Receiving machine's
paper width
B4
A4 (8-1/2" x 14", 8-1/2" x 11")
A4
4-28
), the image is automatically rotated 90 degrees
Transmission
A4R (8-1/2" x 11"R)
image is transmitted.
Reduced size
B4
A4R (8-1/2" x 14", 8-1/2" x 11"R)
A4R
FACSIMILE
), it
Ratio
1 : 0.84
1 : 0.71
1 : 0.84
Contents