Sharp MX-4100N Operation Manual page 595

• Completed job
Display
"Send OK"
"In Memory"
"Received"
"Forward OK"
"Stopped"
"Delete"
"Number of
successful
transmission
destinations/
Total
destinations
OK"
"No
Response"
"OK Report"
"NG Report"
"No Report"
"Received"
"Rejected"
"NGxxxxxx"
"Error"
Downloaded From ManualsPrinter.com Manuals
Status
Transmission was completed.
An Internet fax has been received
but has not yet been printed.
Printed received fax data.
A received Internet fax has been
forwarded.
The job was stopped.
Deleted received data in the image
check screen.
Completion of a broadcast
transmission or inbound routing
operation.
If transmission to 3 destinations
was successful out of a total of 5,
"003/005 OK" will appear.
An error occurred because there
was no response from the
destination.
A receive report was requested for
a transmission, the transmission
was completed normally, and the
receive report was received from
the destination.
A receive report was requested for
a transmission, however, the
transmission did not take place
correctly and a transmission failed
report was received.
An e-mail was received without an
attached file and thus printing was
not possible.
An e-mail was received, however,
the attached file was not a TIFF-F
file or there was no attached file,
and thus printing was not possible.
An Internet fax was sent from a
party that is blocked.
Transmission/reception was not
successful because a
communication error occurred (a
6-digit error code appears in
xxxxxx.)
An error occurred while the job was
being executed.
5-106
SCANNER/INTERNET FAX
Contents