Sharp MX-4100N Operation Manual page 554

Scan/File Format
File Type
PDF
TIFF
XPS
Programmed
Specified Pages per File
Scan/File Format
File Type
PDF
TIFF
XPS
JPEG
Programmed
3
Specified Pages per File
• The [Programmed] key does not appear in USB memory mode.
• When this screen is displayed, the setting screen of [B/W] mode initially appears.
• The format setting for [B/W] mode is the file format that is used when the [BLACK & WHITE START] key is pressed
with the B/W mode set to [Mono2].
• The format setting for [Colour/Grey] mode is the file format that is used when the [COLOUR START] key is pressed,
or when the [BLACK & WHITE START] key is pressed with the B/W mode set to [Greyscale].
• The file type of [B/W] mode and the file type of [Colour/Grey] mode are linked. The file type cannot be set separately
for each. (When [JPEG] is selected for [Colour/Grey] mode, [TIFF] is automatically selected for [B/W] mode.)
• Note the following when the file format is set to Compact PDF ([PDF] is selected and the [High] checkbox is set to
- When Compact PDF is set for one address in a broadcast transmission, the file will be sent as a Compact PDF
file to all scanner addresses.
- When Compact PDF format or Compact PDF (Ultra Fine) format is set for one address in a broadcast transmission, the
file will be sent in Compact PDF (Ultra Fine) format to all scanner addresses.
- If a fax destination is specified or the resolution is set after Compact PDF is set, the Compact PDF setting will be
cancelled, the file format will be [PDF], and the compression ratio will be [High].
- If Compact PDF is set when a resolution setting has been specified in scanner (or other) mode, the resolution
setting will be cancelled and the Compact PDF resolution will be used for transmission.
- When Compact PDF is selected, [Resolution] cannot be changed while waiting for the next original or in
[Configure] in the job build settings.
- If Compact PDF is set when an image type setting has been specified in scanner (or other) mode, [Photo] will
change to [Text/Photo] and [Map] will change to [Text/Prtd.Photo].
Downloaded From ManualsPrinter.com Manuals
(1) (2)
Compression Mode
Low
Encry.
MH (G3)
MMR (G4)
(1-99)
(2) (3)
Compression Ratio
Low
Encry.
Medium
High
High
U-Fine
(1-99)
Set the format.
● Scanning in Mono2
(1) Select the file type.
To send a file using Encrypt PDF, touch the [Encry.]
OK checkbox to select it (
(2) Select the compression mode.
B/W
Colour/Grey
● Scanning in colour/greyscale
(1) Touch the indicated key to select
(1)
[Colour/Grey] mode.
When [Colour/Grey] is highlighted, [Colour/Grey] mode is selected.
OK
(2) Select the file type.
• To send a file using Encrypt PDF, touch the [Encry.]
checkbox to select it (
B/W
• When Enhanced compression kit is installed, the [High] and
[U-Fine] checkboxes appear. To suppress image quality
Colour/Grey
deterioration and reduce the data size of a file to be
transmitted, Compact PDF can be selected. [U-Fine] can only
be selected when Compact PDF is set.
(3) Select the compression ratio.
• High results in a smaller file size, however, the image
quality is slightly degraded.
• When [High] is selected in the file format settings, the
compression ratio cannot be selected.
5-65
SCANNER/INTERNET FAX
).
).
Contents
):