System Settings (General); Accessing The System Settings (General) - Sharp DX-2500N Operation Manual

SYSTEM SETTINGS (GENERAL)

This section describes the system settings that can be configured by general users of the machine.

Accessing the System Settings (General)

System Settings
Total Count Default Settings
Paper Tray
Address Control
Settings
Printer Condition Document Filing
Settings Control
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• For the procedure to follow when user authentication is enabled, see
"1. BEFORE USING THE MACHINE".
Admin Password Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
7-5
Make sure that the machine is in the standby state and
then press the [SYSTEM SETTINGS] key (
touch panel.
When the [SYSTEM SETTINGS] key
the following menu screen appears on the touch panel.
Touch the item in this screen that you wish to configure.
For detailed explanations of each of the settings, see the
following pages of this chapter.
"USER AUTHENTICATION" (page 1-17) in
SYSTEM SETTINGS
) on the
is touched,
( )
Contents