Performing "Scan To Hdd - Sharp MX-4100N Operation Manual

PERFORMING "Scan to HDD"

1
(4)
COPY
Ready to scan to HDD.
Press [Start] to scan original.
File Retrieve
File
Information
2
Preview
If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided
Tablet] key as appropriate for the original.
Press the [COLOUR START] key or the [BLACK & WHITE START] key .
Scanning begins.
For the procedure for placing the original, see step 4 of
When Preview is enabled, the preview screen appears.
☞
3
Checking the image before storing it (Preview)
A beep will sound to indicate that Scan to HDD is completed.
To cancel scanning...
Press the [STOP] key (
When Scan to HDD is performed without appending file information, the following user name and file name are automatically
assigned to the file.
User Name: User Unknown
File Name: Mode_Day-Month-Year_Hour-Minute-Second
Stored to:
When user authentication is used, the user name that was used for login is automatically selected.
Downloaded From ManualsPrinter.com Manuals
(2) (1)
DOCUMENT
IMAGE SEND
FILING
Scan to HDD HDD Status Ex Data Access
Auto A4
Original Scan: Store:
Auto
Exposure
Resolution 200X200dpi
Comp. Ratio Medium
Auto Mono2
Colour Mode
Special Modes
).
(Example: HDD_04042010_112030)
Main Folder
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Switch to document filing mode and
(3)
select Scan to HDD settings.
(1) Touch the [DOCUMENT FILING] key.
(2) Touch the [Scan to HDD] tab.
Auto
If you do not wish to select settings, go to the next step.
(3) Select the original size, exposure,
resolution, compression ratio, colour mode,
and special modes.
See ""Scan to HDD"
(4) Touch the [File Information] key.
The settings are the same as for "File". See
INFORMATION" (page 6-15).
"SAVING A FILE WITH "Quick
(page 6-22)
6-23
DOCUMENT FILING
SCREEN" (page 6-18).
"FILE
File"" (page 6-11).
Contents