Sharp MX-4100N Operation Manual page 184

Covers/Inserts
Front Cover Setting
Paper Tray
Bypass
Plain
4
If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied on, tab
paper can be inserted.
To cancel cover settings...
Touch the [Cancel] key.
Special Modes
Covers/Inserts
Cover Setting
Front
5
Cover
Back
Cover
Downloaded From ManualsPrinter.com Manuals
(3) (2) (1)
Cancel
Print on Front Cover
Yes
(A)
Tray
A4
(B) 1-Sided
Cancel
Inserts Setting
Insertion
Type A
Insertion
Settings
Insertion
Type B
Tray Settings Page Layout
Select cover settings.
(4)
(1) If the cover sheet will be copied on, touch
the [Yes] key. Otherwise, touch the [No]
OK
key.
If the [No] key is touched, only cover insertion will be
No
performed.
In this case, go to step (3).
2-Sided
(2) To copy on one side of the cover, touch the
[1-Sided] key. To copy on both sides of the
cover, touch the [2-Sided] key.
(3) Select paper settings for the cover.
(A) The currently selected paper tray for the cover is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the cover, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the paper tray for the cover in the
tray selection screen and touch the [OK] key.
Covers/Inserts
Front Cover
(4) Touch the [OK] key.
If you wish to insert a back cover, touch
OK
the [Back Cover] key.
OK
The screen of step 4 appears. The procedures are the same as
for the front cover. Follow the procedures in step 4.
When following the procedures, substitute "Back Cover" for
"Front Cover".
2-63
Paper Tray
Bypass Tray
A4
1. A4 Plain
Plain
2. A4R Plain
3. B4 Plain
4. A3 Plain
Contents
COPIER
OK