Sharp MX-4100N Operation Manual page 205

Special Modes
Card Shot
4
Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
5
To cancel scanning...
Press the [STOP] key (
Turn the card over and press the [COLOUR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Use the same [START] key that you used for the front side of the card.
6
To cancel scanning...
Press the [STOP] key (
Place next original. Press [Start].
When finished, press [Read-End].
7
To cancel copying...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
(1)
Cancel
X 86
(25~210)
Fit to
mm
Page
Y
54
(25~210)
mm
Size Reset
).
).
Read-End
).
Select card shot settings.
(2)
(1) Enter the original size.
OK
With the [X] key highlighted, enter the X (horizontal)
OK
dimension of the original with the
Touch the [Y] key and enter the Y (vertical) dimension of
(A) the original with the
You can also directly touch a numeric value display key to
(B)
change a number with the numeric keys.
(A) To enlarge or reduce the images to fit the paper
based on the entered original size, touch the [Fit to
Page] key.
(B) The [Size Reset] key can be pressed to return the
horizontal and vertical dimensions to the values set in
"Card Shot Settings" in the system settings
(administrator).
(2) Touch the [OK] key.
You will return to the base screen of copy mode. Make
sure that the entered dimensions appear in the [Original]
key.
Touch the [Read-End] key.
Copying will begin.
2-84
COPIER
keys.
keys.
Contents