When User Authentication Is Enabled - Sharp MX-4100N Operation Manual

When User Authentication is Enabled

When "User Authentication
When auto login is enabled, the login screen will not appear.
When user authentication is by login name and password (and e-mail
address)
Administrator login is performed in the user selection screen. For more information on the login procedure when user
authentication is enabled, see
Device Account Mode User Selection
6 12 18
Admin Login
1
Direct Entry
ABC
User
User Authentication
Login Name
User Name
Password
Auth to:
2
(1)
• If login name / password / e-mail address is selected for the authentication method, the [E-mail Address] key will
appear below the "User Name".
• For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Safety
Guide.
• This completes the administrator login procedure. The system settings (administrator) can be used.
Downloaded From ManualsPrinter.com Manuals
Setting" (page 7-45) is enabled, follow the procedure below to log in.
"USER AUTHENTICATION" (page 1-17) in "1. BEFORE USING THE MACHINE".
Name 1 Name 2
Name 3 Name 4
Name 5 Name 6
Name 7 Name 8
Name 9 Name 10
Name 11 Name 12
All ABCD EFGH IJKL MNOP QRSTU
Administrator
Login Locally
Touch the [Admin Login] key.
Back
1 1
2 2
VWXYZ etc.
Log in.
OK
(1) Touch the [Password] key.
Enter the administrator password in the administrator
password entry screen.
(2) Touch the [OK] key.
(2)
7-27
SYSTEM SETTINGS
Contents