Performing F-Code Communication; F-Code Communication; How F-Codes Work - Sharp MX-4100N Operation Manual

Hide thumbs Also See for MX-4100N:

Table of Contents

PERFORMING F-CODE

COMMUNICATION

This section explains how to perform F-code communication operations. F-code communication is possible with

machines of other manufacturers that also support F-code communication.

Exchange of confidential documents (confidential communication), retrieval (polling) and distribution (polling memory) of

information, distribution of information to multiple destinations (relay broadcast transmission) are possible with other

machines that support F-code communication.

An F-code* is specified in each communication, enabling a higher level of security.

* F-code is a communication function based on the G3 standard of the ITU-T.

The ITU-T is a United Nations organization that establishes communications standards. It is a department of the International

Telecommunication Union (ITU), which coordinates global telecommunications networks and services.

A fax that is transmitted with an F-code is received to the memory box in the receiving machine specified by the F-code

(sub-address and passcode). If the F-code sent by the transmitting machine does not match the F-code in the receiving

machine, reception will not take place.

Fax number of other

Sub-address:

The products of other manufacturers may use different terms for "sub-address" and "passcode". If you need to contact the

operator of another machine regarding sub-addresses and passcodes, refer to the terms used by the ITU-T in the table below.

An F-code consists of a sub-address and passcode, and cannot be longer than 20 digits.

Downloaded From ManualsPrinter.com Manuals

The fax is received to

the memory box

specified by the

F-code polling memory box

Memory box for F-code

communication

F-code confidential box

Sub-address:

F-code relay broadcast

Show Quick Links

Chapters

Table of Contents