Checking Information On A Copy Job Waiting In The Queue; Checking Job Details - Sharp MX-4100N Operation Manual

CHECKING INFORMATION ON A COPY JOB WAITING
IN THE QUEUE
Detailed information can be displayed on a copy job waiting in the queue.
1
(1)
Print Job
Job Queue
1 Copy
2 Copy
3 Computer01
4
0312345678
2
[Paper Select] key
If a copy job is stopped because the paper ran out, the [Paper Select] key can be pressed to change to a
different paper tray.
When the [Paper Select] key is pressed, the paper tray selection screen appears.
☞
PAPER TRAYS
Touch the key of the tray that has the size of paper that you wish to use and then touch the [OK] key. The
stopped copy job will resume.
Downloaded From ManualsPrinter.com Manuals
JOB STATUS
Scan to Fax Job
Internet Fax
Sets / Progress Status
020 / 001 Copying
002 / 000 Waiting 1
1
002 / 000 Waiting
001 / 000 Waiting
(3)
(page 2-11)
Press the [JOB STATUS] key.

Checking job details

(2)
(1) Touch the [Print Job] tab.
Spool (2) Change the print job status mode to [Job
Job Queue
Queue].
Complete
Touch this key to change modes. The selected mode will
be highlighted.
Detail (3) Touch the key of the job that you wish to
Priority
check.
Stop/Delete
(4) Touch the [Detail] key.
(4)
The job check screen of the job selected in (3) appears.
Detail
Copy
Colour / B/W: Full Colour
Exposure:
Paper:
Copy Ratio:
2-146
002 / 000 Waiting
2-Sided
Copy:
1 3 5 Output:
A4
Special
Paper Select
Plain
Modes:
X100% Y100%
Contents
COPIER
OK