Relay Request Transmission Using F-Codes - Sharp MX-4100N Operation Manual

RELAY REQUEST TRANSMISSION USING
F-CODES
This function is used to send a fax to an F-code relay broadcast memory box in another machine and have that machine
relay the fax to multiple end receiving machines.
When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end
receiving machines can help reduce phone charges. A relay request transmission can be used in combination with the
timer transmission function to further reduce phone costs.
☞
SENDING A FAX AT A SPECIFIED TIME (Timer)
The machine
Transmission specifying an F-code
Sub-address:
Passcode:
• Verify the F-code (sub-address and passcode) and end receiving machines programmed in the relay broadcast memory
box in the relay machine before you perform an F-code relay request transmission.
• Before this function can be used, the end receiving machines must be programmed in the F-code relay broadcast memory
box in the relay machine.
• The end receiving machines do not need to support F-code communication.
• This function can be used in combination with a broadcast transmission or timer transmission. An F-code relay request
transmission can also be stored in a program.
• Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the
relay machine. The relay machine bears the cost of sending the fax to each of the end receiving machines.
• When faxes forwarded using this function are printed at the forwarding destination, the date and time of reception cannot
be printed on the faxes. ("Receiving Date & Time Print" is disabled.)
System Settings:
This is used to create memory boxes for F-code relay broadcast transmission.
A memory box name, sub-address, passcode, and end receiving machines are programmed in each box.
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Downloaded From ManualsPrinter.com Manuals
(page 4-78)
Relay machine
F-code relay broadcast
memory box
AAAAAAAA
Box name:
XXXXXXXX
Sub-address:
Passcode:
End receiving machines are
programmed in this box
F-Code Memory Box (page 7-101)
The fax is transmitted to
each of the end receiving
machines programmed in
the F-code relay
broadcast memory box.
Transmission
BBBB
AAAAAAAA
XXXXXXXX
4-121
FACSIMILE
End receiving
machines
Contents