System Settings For Fax (Administrator) List - Sharp MX-4100N Operation Manual

System Settings for Fax (Administrator) List

When the system settings for fax are accessed with administrator rights, the following items appear. For information on
the general settings, see
• For the procedure for using the system settings (administrator), see
7-26).
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Image Send Settings
■
Image Send Settings
●
Fax Settings
Fax Default Settings
Auto Wake Up Print
Pause Time Setting
Fax Dest. Confirmation Mode
Speaker Settings
• Speaker
• Ringer Volume
• Line Monitor
• Fax Receive Complete Signal
• Fax Send Complete Signal
• Fax Communication Error Signal
Remote Reception Number Setting
Original Print on Transaction Report
Downloaded From ManualsPrinter.com Manuals
"System Settings for Fax (General)
Item
List" (page 7-98).
"Accessing the System Settings
Factory default setting
Enabled
2 sec.
Disabled
Volume: 5
Volume: 5
Volume: 5
Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 0.3 sec. each
5
Print Out Error Report Only
7-104
SYSTEM SETTINGS
(Administrator)" (page
Page
7-106
7-106
7-106
7-106
7-106
7-106
7-106
7-106
7-106
Contents