Using The Document Glass To Send A Fax In Direct Transmission Mode - Sharp MX-4100N Operation Manual

USING THE DOCUMENT GLASS TO SEND A FAX IN
DIRECT TRANSMISSION MODE
When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.
1
Do not place any objects under the original size detector. Closing the automatic document feeder with an object
underneath may damage the original size detector plate and prevent correct detection of the document size.
(3)
5 10 15
Condition
Settings
Address Review
Address Entry
Global
Address Search
Sub Address
2
Sort Address
Preview
• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot
be used.
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
Downloaded From ManualsPrinter.com Manuals
Original size
detector
(2)
To Cc
AAA AAA BBB BBB
CCC CCC DDD DDD
EEE EEE FFF FFF
GGG GGG HHH HHH
III III JJJ JJJ
Freq. ABCD EFGH IJKL MNOP QRSTU
"ENTERING DESTINATIONS" (page 4-17).
Open the automatic document feeder,
place the original face down on the
document glass, and then gently close
the automatic document feeder.
Document glass scale
mark
A5
(5-1/2" x 8-1/2")
B5
A4 (8-1/2" x 11")
• Align the corner of the original with the tip of the arrow mark
on the document glass scale.
• Place the original in the appropriate position for its size as
shown above.
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch the one-touch key of the desired
destination.
(3) Touch the [Condition Settings] key.
VWXYZ etc.
4-37
FACSIMILE
Document glass scale
mark
B5R
A4R (8-1/2" x 11"R)
B4 (8-1/2" x 14")
A3 (11" x 17")
Contents