Sharp MX-4100N Operation Manual page 778

Transaction Report Print Select
Setting
This is used to select whether or not a transaction report
will be printed, and if printed, the condition for being
printed. Select a setting for each of the following
operations:
Single Sending
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
Broadcasting
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
Receiving
• Print Out All Report
• Print Out Error Report Only
• No Printed Report
Confidential Reception
• Print Out Notice Page
• No Printed Report
When a transaction report is printed, you can have part
of the first page of the transmitted original printed on the
transaction report. For more information, see
Print on Transaction
When transaction report printing is set for "Receiving",
a report will not be printed for a reception from a
number specified as a reject number in
Number Setting" (page 7-110).
Activity Report Print Select Setting
This is used to have the Image Sending Activity Report
that is stored in the machine's memory printed at regular
intervals.
The Image Sending Activity Report can be set to
automatically print each time the number of transactions
reaches 201, and it can also be set to automatically print
at a specified time (once a day only). (The settings can
be simultaneously enabled.)
• If you only select the "Print Daily at Designated
Time" setting
transactions exceeds 201 before the specified time,
each new transaction will delete the oldest
transaction (the oldest transaction will not be
printed).
• The Image Sending Activity Report can also be
printed manually. See
(page 7-89).
Downloaded From ManualsPrinter.com Manuals
"Original
Report".
"Allow/Reject
and the number of recorded
"List Print (Administrator)"
ECM
Line conditions can sometimes distort a transmitted fax
image. When ECM (Error Correction Mode) is turned on,
pages that are distorted are automatically re-transmitted.
If the other machine supports Super G3, ECM will
function regardless of this setting.
7-107
SYSTEM SETTINGS
Contents