Sharp MX-4100N Operation Manual page 229

Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the
2
(3) Touch the [Image Edit] key.
(4) Touch the [Photo Repeat] key.
☞
[Image Edit] KEY
Image Edit
Photo Repeat
Original Size
3
130x 90mm
3x 5"
When making repeat copies of a business card size original (up to 57 mm x 100 mm (2-1/8" x 3-5/8")), only A4
(8-1/2" x 11") can be selected for the paper size.
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the
4
first original.
To cancel scanning and copying...
Press the [STOP] key (
• The original must be placed on the document glass.
• Only A4 (8-1/2" x 11") or A3 (11" x 17") size paper can be used.
• The copy ratio is 100% when this function is used. (The ratio cannot be changed.) However, for a business card size
original (up to 57 mm x 100 mm (2-1/8" x 3-5/8")), the images are reduced to 95%.
To cancel the photo repeat setting...
Touch the [Cancel] key in the screen of step 3.
Downloaded From ManualsPrinter.com Manuals
keys to switch through the screens.
(page 2-106)
(1) (2)
OK
Cancel OK
Repeat Type
A4/8½x11 A3/11x17
4 8
).
Select Photo Repeat settings.
(1) Touch the key showing the original type
and paper size combination that you want
to use.
1
Touch the
5
touch the desired repeat type key (A4 or A3 (8-1/2" x 11"
or 11" x 17")).
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-108
COPIER
keys to switch through the screens and
Contents