Finisher (Large Stacker) - Sharp MX-4100N Operation Manual

FINISHER (LARGE STACKER)

1
2
3
Take care that a bent staple does not hurt you.
4
Downloaded From ManualsPrinter.com Manuals
Open the front cover.
Squeeze the green parts of the staple
case and pull the case up and then out.
Lower the lever at the front end of the
staple case and remove the jammed
staple.
Remove the leading staple if it is bent. If bent staples remain, a
staple jam will occur again.
Return the lever to its original position.
8-10
TROUBLESHOOTING
Contents