Receiving A Fax After Answeringa Call On The Extension Phone (Remote Reception); Making And Receiving Phone Calls - Sharp MX-4100N Operation Manual

RECEIVING A FAX AFTER ANSWERING A CALL ON
THE EXTENSION PHONE (Remote Reception)
Follow the steps below if you need to start fax reception after answering a call and speaking on the extension phone.
If you are on a pulse-dial (rotary) line, set the extension phone to issue tone signals.
1
2
3
If the extension phone is still lifted when fax transmission ends, an alarm signal will sound and a message will appear in the
touch panel. The alarm and message will stop when the extension phone is replaced.
• System Settings:
To use remote fax reception, set this setting to "Manual Reception".
• System Settings (Administrator): Remote Reception Number Setting
This is used to change the number used for remote fax reception. The factory default setting is "5".

MAKING AND RECEIVING PHONE CALLS

You can make and receive calls like normal on your extension phone. A phone call can also be made by dialling on the
machine.
Downloaded From ManualsPrinter.com Manuals
Receive Setting (page 7-103)
When you hear ringing, answer the call
on the extension phone.
Signal the machine to start fax
reception.
Press on the keypad of the extension phone.
Replace the extension phone.
The machine sounds a beep when reception ends.
4-125
FACSIMILE
Contents