Manually Selecting The Ratio (Preset Ratios/Zoom) - Sharp MX-4100N Operation Manual

MANUALLY SELECTING THE RATIO (Preset
ratios/Zoom)
Touch the [Copy Ratio] key in the base screen of copy mode to select one of five preset enlargement ratios or five preset
reduction ratios (maximum 400%, minimum 25%).
In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
Copy Ratio
B4 B5
70%
A3 A4
B5 A5
81%
B4 A4
A4 B5
86%
A3 B4
Auto Image
(A)
1
Copy Ratio
25%
50%
75%
99%
Auto Image
• (A) keys
The keys marked (A) can be set to show any ratio using "Add or Change Extra Preset Ratios" in the system settings
(administrator).
• To quickly select a ratio, touch a reduction or enlargement key to select a ratio close to the desired ratio and then
use the zoom keys for fine adjustment.
• The zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.
Touch the
key, the ratio will change automatically. After 3 seconds, the ratio will change rapidly.)
• As an alternative to touching the
change the value with the numeric keys.
• If the message "Image is larger than the copy paper." appears when an enlargement ratio is selected, the image
may not fit on the paper.
Downloaded From ManualsPrinter.com Manuals
100
B5 A4
%
115%
B4 A3
A5 B5
Zoom
122%
A4 B4
B5 B4
141%
A4 A3
100%
XY Zoom
100
%
200%
Zoom 400%
300%
100%
350%
XY Zoom
key to increase the ratio, or the
Set the ratio.
Touch a preset ratio key and/or the zoom keys to set the ratio.
There are two setting screens. Use the
between the screens.
● 1st screen
• Enlargement keys:
OK
115%, 122% and 141% (for the AB system).
121% and 129% (for the inch system).
• Reduction keys:
1
70%, 81% and 86% (for the AB system).
2
64% and 77% (for the inch system).
• [100%] key
● 2nd screen
• Enlargement keys (2 to 4 ratios)
200%, 400%, any ratio (max. of two)
• Reduction keys (2 to 4 ratios)
OK
25%, 50%, any ratio (max. of two)
• [100%] key
2
2
key to decrease the ratio. (If you continue to touch the
keys, you can also directly touch the numeric value display key and
2-26
COPIER
keys to switch
/
Contents