Sharp MX-4100N Operation Manual page 45

When a saddle stitch finisher is
installed
(8) Punch module*
This is used to punch holes in output.
Requires a finisher (large stacker).
☞
PUNCH MODULE
(9) USB connector (A type)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB
memory to the machine.
For the USB cable, use a shielded cable.
(10) Keyboard*
This is a keyboard that is incorporated into the machine.
When not used, it can be stored under the operation
panel.
This is included as standard equipment on the
MX-4101N/5001N.
☞
ENTERING TEXT FROM A KEYBOARD
(MX-KBX2SE)
(11) Saddle stitch finisher
This can be used to staple output. The saddle stitch
function for folding and stapling output and the fold function
for folding output in half are also available. A punch module
can also be installed to punch holes in output.
☞
SADDLE STITCH FINISHER
(12) Finisher (large stacker)
This can be used to staple output.
☞
FINISHER (LARGE STACKER)
* Peripheral device.
Downloaded From ManualsPrinter.com Manuals
(11)
(page 1-53)
(page 1-80)
*
(page 1-49)
(page 1-46)
BEFORE USING THE MACHINE
(8)
(12) (13) (14) (15)
(13) Tray 1
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4
(14) Tray 2
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4
(15) Tray 3 (when a stand/1 x 500 sheet paper drawer or a
stand/2 x 500 sheet paper drawer is installed)*
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4
(16) Tray 4 (when a stand/2 x 500 sheet paper drawer is
installed)*
This holds paper.
☞
TRAY SETTINGS FOR TRAY 1 TO 4
(17) Tray 5 (when a large capacity tray is installed)*
This holds paper.
☞
TRAY SETTINGS OF TRAY 5 (LARGE CAPACITY
TRAY) (page 1-32)
1-4
(9) (10)
(16) (17)
Contents
(page 1-30)
(page 1-30)
(page 1-30)
(page 1-30)