Sharp MX-4100N Operation Manual page 187

Covers/Inserts
Insertion Type A Settings
Paper Tray
Bypass
Plain
4
If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied
on, tab paper can be inserted.
Special Modes
Covers/Inserts
Cover Setting
Front
5
Cover
Back
Cover
Downloaded From ManualsPrinter.com Manuals
(3) (2) (1)
Cancel
Print on Insert Sheets
Yes
(A)
Tray
A4
1-Sided
(B)
Cancel
Inserts Setting
Insertion
Type A
Insertion
Settings
Insertion
Type B
Tray Settings Page Layout
Select insert settings.
(4)
(1) If the insert will be copied on, touch the
[Yes] key. Otherwise, touch the [No] key.
OK
If the [No] key is touched, only insert sheet insertion will
be performed.
No
In this case, go to step (3).
(2) To copy on one side of the insert, touch the
2-Sided
[1-Sided] key. To copy on both sides, touch
the [2-Sided] key.
(3) Select insert paper settings.
(A) The currently selected paper tray for the insert is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the inserts, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the desired paper tray in the tray
selection screen and touch the [OK] key.
Covers/Inserts
Insertion Type A
(4) Touch the [OK] key.
If you wish to insert a different type of
OK
insert sheet, touch the [Insertion Type B]
OK
key.
The screen of step 4 appears. Settings are selected in the
same way as for insert type A. Follow the procedures in step 4.
When following the procedures, substitute "Insert Type B" for
"Insert Type A".
2-66
Paper Tray Bypass Tray
A4
1. A4 Plain
Plain
2. A4R Plain
3. B4 Plain
4. A3 Plain
Contents
COPIER
OK