Turning The Power On And Off; Restarting The Machine - Sharp MX-4100N Operation Manual

TURNING THE POWER ON AND OFF

The machine has two power switches. The main power switch is at the lower left after the front cover is opened. The
other power switch is the [POWER] key (
Main power switch
When the main power switch is switched on, the main
power indicator on the operation panel lights up.
"On" position
"Off" position
Turning on the power
(1) Switch the main power switch to the "on"
position.
(2) Press the [POWER] key (
power.
• When turning off the power, be sure to press the [POWER] key (
switch off the main power switch. In the event that the main power is suddenly interrupted due to a power failure or other
reason, turn the machine power back on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been turned off prior to the [POWER] key (
noises, degraded image quality, and other problems may result.
• Before switching off the main power switch, make sure that the DATA indicator for printing and the DATA and LINE
indicators for image send are not lit or blinking on the operation panel.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking
may damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key (
failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the main power switch in the "on" position.

Restarting the machine

In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key (
and then press the key again to turn the power back on.
In some states of the machine, pressing the [POWER] key (
use the main power switch to switch the power off and then on.
Downloaded From ManualsPrinter.com Manuals
) on the operation panel at the top right.
) to turn on the
) and the main power switch and unplug the power cord if you suspect a machine
1-15
BEFORE USING THE MACHINE
[POWER] key
Main power indicator
Turning off the power
(1) Press the [POWER] key (
power.
(2) Switch the main power switch to the "off"
position.
) on the operation panel, then wait 15 seconds and
) to restart will not make the settings take effect. In this case,
[POWER] key
) to turn off the
), abnormal
) to turn off the power
Contents