Sharp MX-4100N Operation Manual page 140

2-Sided Copy
3
The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
Colour Mode
Full Colour
Exposure
Auto
4
Copy Ratio
100%
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
5
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
6
Scanning begins.
Remove the original and place the next original, and then press the [COLOUR
START] key or the [BLACK & WHITE START] key.
7
Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key as you did for the first original.
Downloaded From ManualsPrinter.com Manuals
(1)
Special Modes
2-Sided Copy
Plain
A4
1. A4
A4R
2.
B4
3.
A3
4.
Quick File
Original Paper Select
Auto
Auto
A4
A4
Plain
Special Modes
2-Sided Copy
Plain
A4
) and then enter the correct number.
Select the 2-sided copy mode.
(2)
(1) Touch the [1-Sided to 2-Sided] key.
OK
(2) Touch the [OK] key.
Binding
Change
Check the paper to be used and the
colour mode.
Make sure that the desired paper (tray) and colour mode are
Output
selected.
File
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
• To change the colour mode, touch the [Colour Mode] key.
☞
COPY COLOUR MODES
Preview
Set the number of copies (number of
7
sets) with the numeric keys.
2-19
(page 2-11)
(page 2-21)
Contents
COPIER