Rear Wheels; Removing And Installing The Rear Wheels With Quick-Release Axle - Otto Bock Start M1 Instructions For Use Manual

6.8 Rear wheels

CAUTION
Incorrect fitting of the rear wheels
Tipping, falling over of the user due to wheels coming off
► After each assembly, verify the proper fit of the rear wheels. The quick-release axles must be firmly locked in
the wheel attachment.
CAUTION
Reaching into exposed drive parts
Crushing, pinching due to incorrect handling
► Do not reach between the rear wheel and wheel lock or rear wheel and side panel when driving the wheel­
chair.
► Do not reach into the spokes of the rotating rear wheel.
CAUTION
Defective tyres
Accidents/falling due to poor traction, reduced braking force or lack of manoeuvrability
► Ensure that the tyres have sufficient tread depth.
► Replace the rear wheels in case of tyre damage (tread surface extends up to 5 mm to the edge of the tyre,
cracking) or damage on the rim.
CAUTION
Heat development when braking with push rings
Burns due to insufficient hand protection
► Wear wheelchair gloves when travelling at high speeds.
The wheelchair is moved, steered, braked and stopped with the help of the push rings on the rear wheels.
To make transport easier, rear wheels with quick-release axle can be taken off the wheelchair.

6.8.1 Removing and installing the rear wheels with quick-release axle

CAUTION
Incorrect removal/attachment of the wheels
Tipping, falling due to incorrect installation
► The user is not permitted to sit in the wheelchair during wheel replacement.
► For changing wheels, set the wheelchair onto a solid surface.
► To change the wheels, secure the wheelchair against tipping over or rolling away.
► If the rear wheel does not lock securely or has too much sideways play, contact the qualified personnel
promptly.
1) Release the wheel lock.
2) Grip the area between the spokes near the hub with your fingers.
3) Use your thumb to press the push-button on the quick-release axle.
4) Pull off/push on the rear wheel. The quick-release axles must not be able to be removed after the push-button
has been released.
Start M1
Use
Ottobock | 19