wsm ME8200 Workshop Manual page 285

ME8200, ME9000, WSM
Support Cabin
1. Set the cabin dismounting tool (1) and support the cabin.
2. Set the rocking restrictor (2) to the front axle.
(1) Cabin Dismounting Tool
Cabin Mounting Bracket Rear
1. Disconnect the parking brake rod (4) from the brake cam lever
(5).
2. Remove the cabin mounting bolts and nuts (1).
3. Remove the rear bracket mounting bolts and nuts (3).
4. Remove the stabilizer bracket (7).
5. Raise the cabin frame until the rear bracket (2) becomes free to
move.
6. Remove the rear bracket (2).
(When reassembling)
• Check the free play of the parking brake lever.
• Bleed the air from brake oil line.
Cabin mounting bolts and
nuts
Tightening torque
Rear bracket mounting
bolts and nuts
(1) Cabin Mounting Bolt and Nut
(2) Rear Bracket
(3) Rear Bracket Mounting Bolt and Nut
(4) Parking Brake Rod
4-S9
REAR AXLE
(2) Rocking Restrictor
W1020087
123.6 to 147.1 N·m
12.6 to 15.0 kgf·m
91.1 to 108.5 lbf·ft
197 to 227 N·m
20.0 to 23.0 kgf·m
145 to 167 lbf·ft
(5) Brake Cam Lever
(6) Brake Pipe
(7) Stabilizer Bracket
W1020355
KiSC issued 03, 2007 A