wsm ME8200 Workshop Manual page 119

ME8200, ME9000, WSM
Radiator Hoses, Air Cleaner Hoses, Heater Hoses, Air
Conditioner Hoses and Oil Cooler Pipes (CABIN Type)
1. Remove the muffler (11).
2. Loosen the clamp (1) and disconnect the heater hoses.
(When reassembling)
• Connect the heater hose with blue paint one which comes from
cabin to the radiator lower hose side.
3. Disconnect the radiator hoses (7), (8), (9) from engine side.
4. Loosen the joint nut (10) and disconnect the oil cooler pipe.
5. Disconnect the air cleaner hose (4) from the intake manifold.
6. Disconnect the hose 1 (2) and hose 2 (3) from engine side
(ME9000 only).
7. Disconnect the wiring from the front buzzer (5), air cleaner sensor
(16) and stay (15).
8. Loosen the clamps (13) and disconnect the low pressure pipe
from the receiver (14).
9. Disconnect the high pressure pipe from the compressor (12).
(1) Clamp
(2) Hose 1
(3) Hose 2
(4) Air Cleaner Hose
(5) Front Buzzer
(6) Oil Cooler
(7) Radiator Hose
(8) Radiator Hose
Power Steering Hoses
1. Disconnect the power steering hoses (1), (2).
(When reassembling)
Turning delivery hose
Tightening torque
retaining nut
(1) Right Turning Delivery Hose
1-S17
ENGINE
(9) Radiator Hose
(10) Joint Nut
(11) Muffler
(12) Compressor
(13) Clamp
(14) Receiver
(15) Stay
(16) Air Cleaner Sensor
W1017098
24.5 to 29.4 N·m
2.5 to 3.0 kgf·m
18.1 to 21.7 lbf·ft
(2) Left Turning Delivery Hose
W1017543
KiSC issued 03, 2007 A