wsm ME8200 Workshop Manual page 227

ME8200, ME9000, WSM
Hydraulic Pipe and Fuel Pipe
1. Remove the accelerator rod (3).
2. Remove the suction pipe (1).
3. Remove the delivery pipe (2) for 3-point hydraulic system.
4. Remove the main delivery pipe (8) and return pipe (6) for the
steering controller.
5. Disconnect the PTO pipe (5).
6. Disconnect the fuel pipe (7) from the filter.
7. Disconnect the fuel over-flow pipe (4).
(When reassembling)
Main delivery pipe and
Tightening torque
return pipe retaining nut
(1) Suction Pipe
(2) Delivery Pipe
(3) Accelerator Rod
(4) Fuel Overflow Pipe
(5) PTO Pipe
Wire Harness R.H.
1. Disconnect the wiring lead (2) for solenoid valve.
2. Disconnect the wiring lead (1) for glow plug.
3. Disconnect the 1P connector (3) for coolant thermo sensor.
4. Disconnect the 2P connector (5) for power steering oil sensor.
(1) Wiring Lead for Glow Plug
(2) Wiring Lead for Solenoid valve
(3) 1P Connector
3-S7
TRANSMISSION
47.1 to 51.0 N·m
4.8 to 5.2 kgf·m
34.7 to 37.6 lbf·ft
(6) Return Pipe for Steering Controller
(7) Fuel Pipe
(8) Main Delivery Pipe for Steering
Controller
W1013219
(4) Bonnet Support
(5) 2P Connector
W1013665
KiSC issued 03, 2007 A