wsm ME8200 Workshop Manual page 193

ME8200, ME9000, WSM
Hydraulic Pipes, Fuel Pipes and Accelerator Rod (CABIN Type)
1. Remove the suction pipe (5) and delivery pipe (4).
2. Disconnect the joint (7) of delivery pipe.
3. Disconnect the accelerator wire (2) and engine stop wire (3) from
the engine.
4. Disconnect the fuel pipes (1), (6).
(1) Fuel pipe
(2) Accelerator Wire
(3) Engine Stop Wire
(4) Delivery Pipe for 3-Point Hydraulic
System
Meter Cable and Steering Joint (CABIN Type)
1. Disconnect the meter cable (1) from the engine.
2. Disconnect the steering joint (2) from the cabin side.
(1) Meter Cable
Wiring Harness (CABIN Type)
1. Disconnect the connectors (1) between the panel and engine,
and pull out the connectors from the cabin.
(1) Connector
2-S11
CLUTCH
(5) Suction Pipe
(6) Fuel Pipe
(7) Joint of Delivery Pipe
W1015688
(2) Steering Joint
W1016057
W1016210
KiSC issued 03, 2007 A