wsm ME8200 Workshop Manual page 231

ME8200, ME9000, WSM
Rear Wheel, Fender, Seat and ROPS
1. Remove the damper (4) and ROPS center frame (2).
2. Remove the seat (1).
3. Check the clutch housing case and transmission case are
securely mounted on the disassembling stands.
4. Remove the rear wheels (6).
5. Disconnect the jumper lead for hazard and tail light.
6. Remove the fenders (5).
7. Remove the fender bracket (3).
(When reassembling)
• Tighten the fender bracket mounting bolt with the ROPS center
frame inserted in the fender bracket, and check the center frame
moves vertically smoothly.
• Install the damper so that the rod portion becomes lower side.
Rear wheel mounting nut
Tightening torque
Fender bracket mounting
bolt
(1) Seat
(2) ROPS Center Frame
(3) Fender Bracket
3-S11
TRANSMISSION
260 to 304 N·m
26.5 to 31.0 kgf·m
192 to 224 lbf·ft
197 to 227 N·m
20 to 23 kgf·m
145 to 167 lbf·ft
(4) Damper
(5) Fender
(6) Rear Wheel
W1015953
KiSC issued 03, 2007 A