wsm ME8200 Workshop Manual page 264

ME8200, ME9000, WSM
Differential Case Cover and Differential Side Gear
1. Remove the differential case cover (3).
2. Remove the differential side gear (1) and differential side gear
washer (2).
(When reassembling)
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) to
the inner circumferential surface of the differential side gear boss.
Differential case cover
Tightening torque
mounting screw
(1) Differential Side Gear
(2) Differential Side Gear Washer
Spiral Bevel Gear
1. Remove the spiral bevel gear.
(When reassembling)
• Check the spiral bevel gear for wear or damage. If it is no longer
serviceable, replace it. Then, also replace the spiral bevel pinion
shaft.
• Apply liquid lock (Three Bond 1372 or equivalent) to the spiral
bevel gear UBS screws.
Spiral bevel gear UBS
Tightening torque
screw
3-S44
TRANSMISSION
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 lbf·ft
(3) Differential Case Cover
W1069162
142.2 to 161.8 N·m
14.5 to 16.5 kgf·m
104.9 to 119.3 lbf·ft
W1069359
KiSC issued 03, 2007 A