wsm ME8200 Workshop Manual page 246

ME8200, ME9000, WSM
(F) Auxiliary Shift Section
Front Drive Gear
1. Remove the external snap ring (3) and 33T gear (2).
2. Remove the external snap ring (5) and 36T gear (4).
3. Draw out the PTO propeller shaft (1).
(1) PTO Propeller Shaft
(2) 33T Gear
(3) External Snap Ring
Auxiliary Shift Section
1. Remove the screw (3), spring (4) and ball (5).
2. Remove the retaining screws and pull the shift lever 1 (1) and 2
(2).
3. Remove the bearing holder (6) mounting screw.
4. Remove the auxiliary shift section assembly.
(When reassembling)
Bearing holder 2 mounting
Tightening torque
screw
(1) Shift Lever 1
(2) Shift Lever 2
(3) Screw
3-S26
TRANSMISSION
(4) 36T Gear
(5) External Snap Ring
(6) Collar
W1147827
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 lbf·ft
(4) Spring
(5) Ball
(6) Bearing Holder
W1098693
KiSC issued 03, 2007 A