Change The Binding Edge - Canon imagePRESS C7010VPS Operating Information Manual

Change the binding edge

Change the binding edge
Introduction
The binding edge determines whether the binding position is along the long edge or the
short edge of the media. The binding edge is usually set via the printer driver, for example.
However, you can view and change the binding edge via the operator panel. The binding
edge has a relation with the direction of the margin shift, orientation and staple position.
#
NOTE
When the binding edge is changed for '2-sided' printing, the image orientation is
automatically adjusted to get the correct layout. The orientation of the image on the
back side of the page will be changed too.
How to change the binding edge
Touch 'Jobs' -> 'Waiting jobs'.
1.
Touch the job you want to change.
2.
#
NOTE
You can only change the settings of the active print job
printer (press the 'Stop' button 2x).
Touch 'Properties' - or touch the job 2x to open the 'Properties' window.
3.
Touch the 'Binding edge' button.
4.
Touch the desired value.
5.
Press 'OK'.
6.
Press 'OK'.
7.
158 Chapter 6 - Print jobs
after you stopped the