Ford 2002 Bantam Workshop Manual page 1474

BACK TO CHAPTER INDEX
501-11-2
DIAGNOSIS AND TESTING
Glass, Frames and Mechanisms
Refer to Wiring Diagrams Cell: 50111, for
schematic and connector information.
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of
mechanical or electrical damage.
Symptom Chart
Condition
• All power windows are inopera-
tive
• Single power window is inopera-
tive - driver side
• Single power window is inopera-
tive - passenger side
Pinpoint Tests
NOTE: Use a digital multimeter for all electrical
measurements.
E9411 EN
Glass, Frames and Mechanisms
Visual Inspection Chart
• Window seal
• Door window frame
3. If an obvious cause for an observed or
4. If the cause is not visually evident, verify the
Possible Sources
• Driver power window control
switch.
• Driver power window control
switch
• Circuit(s).
• Driver power window motor.
• Passenger power window con-
trol switch.
• Driver power window control
switch.
• Circuit(s).
• Passenger power window mo-
tor.
FORD BANTAM
Mechanical
• Fuse(s)
• Electrical
connector(s)
• Switch(s)
• Circuit(s)
reported concern is found, correct the cause
(if possible) before proceeding to the next
step.
symptom and refer to the Symptom Chart.
• CARRY OUT the Driver Power
Window Control Switch Compo-
nent Test.
REFER to the Wiring Diagrams.
• CARRY OUT the Driver Power
Window Control Switch Compo-
nent Test.
REFER to the Wiring diagrams.
• Go To Pinpoint Test A
• CARRY OUT the Passenger
Power Window Control Switch
Component Test.
REFER to the Wiring Diagrams.
• CARRY OUT the Driver Power
Window Control Switch Compo-
nent Test.
REFER to the Wiring Diagrams.
• Go To Pinpoint Test B
08/2001 2002 Bantam
PAGES FROM MANUAL
TO MODEL INDEX
501-11-2
Electrical
Action
CONTINUED