Installation - Intermec EasyCoder PX4i Service Manual

11.2 Installation

EasyCoder PX4i and PX6i Service Manual
Downloaded from www.Manualslib.com
• Switch off the power and remove the power cord.
• Open the printer's front door.
• Hold the printer fi rmly and press the front door sideways to the left so
as to disengage the hinges.
• Remove the door completely.
• If the printer is fi tted with a label taken sensor (LTS), it has to be
removed before the cutter can be fi tted, see Chapter 10.
manuals search engine
Chapter 11 — Paper Cutter
119