Intermec EasyCoder PX4i Service Manual page 233

EasyCoder PX4i and PX6 Service Manual
Downloaded from www.Manualslib.com
IPL only
• Ten possible errors are indicated by messages in the display window:
Error
Empty/Paused
Out of media
Out of ribbon
Printhead lifted
Cutter error
Ribbon fi tted
Paper fault
Power supply error
Power supply too hot
Printhead too hot
Some additional errors can be returned to the host as an ASCII number
by the <BEL> command, see IPL Programming, Reference Manual.
Firmware Error
• In case the CPU is unable to access data on a given address, the internal
program will light up the red error LED regardless of any error-handling
program.
manuals search engine
Chapter 17 — Troubleshooting
Displayed message
PAUSE
PAPER OUT
RIBBON OUT
PRINT HEAD UP/PRESS FEED
OPEN&SHUT CUTTER
RIBBON FITTED
PAPER FAULT
PSU ERROR
PSU OVER TEMP
PRINTHEAD HOT
223