Intermec EasyCoder PX4i Service Manual page 249

EasyCoder PX4i and PX6 Service Manual
Downloaded from www.Manualslib.com
Description:
No transfer printout.
Possible Causes and Suggested Remedies:
• Refer to Chapter 17.13 for general printout troubles.
• Bad ribbon load.
- Transfer ribbon loaded incorrectly so the ink-coated side does not face
the receiving face material. Reload ribbon.
Description:
Ribbon fed out in front of printer.
Possible Causes and Suggested Remedies:
• Printer is set up for direct thermal printing, but a ribbon is loaded.
- Remove ribbon or change the paper type setup to thermal transfer.
• Ribbon rewinder belt broken.
- Replace as described in Chapter 8.4.
manuals search engine
Chapter 17 — Troubleshooting
239