Identifi Cation - Intermec EasyCoder PX4i Service Manual

Chapter 1 — Models and Options
1.1 Identification
Main Models
2
Downloaded from www.Manualslib.com
The EasyCoder PX4i and PX6i constitute a series of direct thermal/thermal
transfer printers, which can run either Intermec Fingerprint Programming
Language (FP) v8.30 (or later) or Intermec Programming Language (IPL)
v2.30 or later. Externally, the difference is visible on the keyboard overlay.
Fingerprint printers have 23 keys or a full alphanumeric keyboard and IPL
printers have 8 keys (see Chapter 2).
EasyCoder PX4i has a maximum print width of 112 mm (4.4 in).
EasyCoder PX6i has a maximum print width of 167.4 mm (6.59 in).
Printers running Fingerprint are available with an 8 dots/mm (203.2 dpi)
or 11.81 dots/mm (300 dpi) printhead density, whereas printers running
IPL only are available with an 8 dots/mm (203.2 dpi) printhead.
A number of options and accessories, such as cutter, internal liner takeup,
label taken sensor, and various types of interface boards, allow the printers
to be tailor-made or adapted for specifi c applications.
EasyCoder PX4i
Fingerprint model
EasyCoder PX6i
Fingerprint model
Note: Unless otherwise stated, illustrations in this manual show an Easy-
Coder PX4i running Intermec Fingerprint.
manuals search engine
EasyCoder PX4i
IPL model
EasyCoder PX6i
IPL model
EasyCoder PX4i and PX6i Service Manual