Limited Operation - OKIDATA Microline 395 Service Handbook

%Limited Operation

Limited Operation
General Information
The Operator Panel Function Item in the Printer Menu can be set to enable (FULL OPERATION) or
disable (LIMITED OPERATION). If the printer is part of a customized system or if it is used by different
operators, a system manager may be using this feature to maintain proper print settings.
FONT, PRINT QUALITY, and CHARACTER PITCH (on the operator panel) do not work when the printer
is set for LIMITED OPERATION.
Procedure
CAUTION:
Check with the system manager BEFORE changing the setting for the operator panel function!
1. Verify that paper is loaded and that the ribbon is installed.
2. Power OFF the printer.
3. Press and hold QUIET while powering ON the printer.
4. Press GROUP until GENERAL CONTROL prints.
5. Press ITEM until OPERATOR PANEL FUNCTION prints.
6. Press SET until FULL OPERATION prints.
7. Press EXIT to exit Menu Mode.
8. The printer will go ON-LINE. (SELECT will light.)
ML395 ( 96-02-03 )