Gear Case Assembly - OKIDATA ML590 Service Manual

3.2.04 Gear Case Assembly

1. Perform these procedures:
3.2.01
3.2.02
2. Use a straight-slot screwdriver to release the four claws (1) of the gear case assembly (2).
3. Lift and remove the gear case assembly.
NOTE:
Lubrication
When lubricating, refer to Section 3.5 of this Service Handbook.
P/N 51228501 Gear: Case (Assembly)
Service Guide ML590/ML591
Chapter 3 Maintenance & Disassembly
RSPL Both B.2.06
Page: 96