Page: 52
Service Guide PM3410
Chapter 3 Maintenance & Disassembly
3.2.18 Line Feed Motor Assembly
(3.2.07)
1. Remove the printer mechanism
2. Remove the three mounting bolts and washers (1), then remove the line feed motor (2).
NOTES:
When installing the line feed motor, the cable should be positioned toward the top.
Adjust the line feed belt tension
(3.3.02)
after installing the line feed motor.
This line feed motor is used in two different places: the bottom push unit and the printer unit.
P/N 56509401 Motor: Line Feed (BTF) RSPL B.2.06
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)