Power Supply Unit - OKIDATA Pacemark 3410 Service Manual
Hide thumbs
Also See for Pacemark 3410:
- Service handbook (308 pages) ,
- User manual (273 pages) ,
- Instruction manual (9 pages)
Table of Contents
Advertisement
Page: 42
Service Guide PM3410
Chapter 3 Maintenance & Disassembly
3.2.08 Power Supply Unit
(3.2.07).
1. Remove the printer mechanism
2. Disconnect the two cables (1) from the left side of the power supply unit (2).
3. Remove the four power supply mounting screws (3).
4. To remove the power supply unit:
Rotate the left side of the power supply unit towards the front of the printer.
Lift the power supply unit to disengage the power switch (4), AC receptacle (5) and the tabs (6).
CAUTION:
Be careful not to damage the cables with the power supply unit mounting bracket (7). This bracket is
located at the left/rear of the power supply unit.
P/N 56406302 Power Supply Assembly (220/240 V) Option B.2.03
P/N 56411201 Power Supply Assembly (120 V) RSPL B.2.03
Advertisement
Table of Contents
Troubleshooting
