Interface Board - OKIDATA Microline 395 Service Handbook

%A.2.03 Interface Board (TFIF)
A.2.03 Interface Board (TFIF)
Firmware
NONE
Fuses
NONE
Jumpers
SP101
A Side - Auto Feed XT signal of Centronics I/F valid
B Side - Auto Feed XT signal of Centronics I/F invalid
SP102
A Side - I-Prime signal of Centronics I/F is valid
B Side - I-Prime signal of Centronics I/F is invalid
SP103
A Side - + 5 vdc is output to pin 18 of Centronics I/F.
B Side - + 5 vdc is not output to pin 18 of Centronics I/F.
Sensors
NONE
Switches
SW101
This switch toggles between serial and parallel interface
Test Points
NONE
ML395 ( 96-02-03 )