Viewing Stored Waveforms - KEPCO BOP 1000W Operator's Manual

TABLE 3-9. SINE, TRIANGLE AND RAMP WAVEFORM FREQUENCY VS. POINTS
Frequency
(See Notes 1, 2, and 3)
From
0.01Hz
2.71Hz
3.71Hz
5.6Hz
8.4Hz
11.1Hz
14.8Hz
22.2Hz
33.3Hz
44.4Hz
NOTES: 1. As the frequency varies within the range, the time interval per point varies proportionately.
2. Sine and Triangle segments can not exceed 443Hz.
3. Ramp segments can not exceed 532Hz.
TABLE 3-10. SQUARE WAVEFORM FREQUENCY VS. POINTS
Frequency
(See Note 1)
From
0.02Hz
1.81Hz
2.71Hz
4.01
5.41
7.21Hz
10.81
16.31Hz
21.71Hz
27.11Hz
55.5Hz
NOTE: 1. As the frequency varies within the range, the time interval per point varies proportionately.
3.3.9.5

VIEWING STORED WAVEFORMS

After observing the precautions of PAR. 3.3.9.1, press
the Saved Waveforms screen (Figure 3-9). Use
a previously saved waveform, then press
3-10). The lower half of the LCD shows a representation of the programmed waveform. The let-
ters along the vertical axis of the graph at the lower left side indicate whether the waveform is
programmed to operate in voltage or current mode. The message at the upper right indicates
the actual mode of the power supply while the waveform is being executed. The upper half pres-
ents the waveform name, positive and negative protection settings, the repetition count, fol-
lowed by a listing of segments. The type (square, sine, etc.), frequency, p-p amplitude, and
BOP HIPWR 080709
Total Points
To
2.7Hz 3840
3.6Hz 2880
5.5Hz 1920
8.3Hz 1280
11.0Hz 960
14.7Hz 720
22.1Hz 480
33.2Hz 320
44.3Hz 240
55.4Hz 192
Total Points
To
1.8Hz 3840
2.7Hz 2880
4.0Hz 1920
5.4Hz 1280
7.2Hz 960
10.8Hz 720
16.3Hz 480
21.7Hz 320
27.1Hz 240
32.6Hz 192
66.5Hz 160
Frequency
(See Notes 1, 2, and 3)
From To
55.5Hz 66.5Hz
66.6Hz 88.7Hz
88.8Hz 118.3Hz
118.4Hz 147.9Hz
148Hz 177.4Hz
177.5Hz 221.8Hz
221.9Hz 295.8Hz
295.81Hz 354.9Hz
355.9Hz 443.7Hz
443.8z 532Hz
Frequency
(See Notes 1)
From To
43.51Hz 58.0Hz
58.01Hz 72.5Hz
72.51Hz 87.0Hz
87.01Hz 108.7Hz
108.71Hz 145.0Hz
145.2.9Hz 174.0Hz
174.1Hz 217.5Hz
217.6Hz 261.0Hz
261.1Hz 435.0Hz
435Hz 652.5Hz
653 1000
@
from the power-up screen to access
Y U
or or the encoder to highlight the name of
!
to view the Waveform Settings screen (see Figure
Total Points
160
120
90
72
60
48
36
30
24 (See Note 2)
20 (See Note 3)
Total Points
120
90
72
60
48
36
30
24
20
12
10
3-27