Table of Contents
Advertisement
ITEM
Mating Connector, Trigger
IEEE 1118 (BITBUS)
Mating connector
IEEE 488 Cable, (1 meter long) Connects BOP power supply to GPIB bus.
IEEE 488 Cable, (2 meter long) Connects BOP power supply to GPIB bus.
IEEE 488 Cable, (4 meter
longs)
Interconnection Kit for multiple
identical power supplies in par-
allel (increase output current)
Interconnection Kit for multiple
identical power supplies in
series (increase output voltage)
Interconnection Kit for multiple
identical power supplies con-
nected in two parallel branches
each comprised of 2 or 3 units
connected in series
Line Cord (250V, 20A)
Line Cord (250V, 20A)
RS 232 Cable Kit
RS 232 Adapter (Male pins)
RS 232 Adapter (Female pins)
15-pin DSUB Connector
IDC 6-pin connector
IDC 8-pin plug
BOP HIPWR 080709
TABLE 1-5. ACCESSORIES
FUNCTION
Mates with Trigger port.
Allows connection to IEEE 1118 (BITBUS) port.
Connects BOP power supply to GPIB bus.
Cables required to connect multiple BOP models in parallel for
increased current capability, e.g., connecting two BOP 10-
75MG models in parallel to produce a virtual BOP 10-150MG.
Cables required to connect multiple BOP models in series for
increased voltage capability, e.g., connecting two BOP 10-
75MG models in series to produce a virtual BOP 20-75MG.
Cables required to connect two parallel branches of series con-
nected power supplies.
KIT 219-0480 is used for 2 parallel connected branches of 2
series connected units. The four (total) power supplies provide
double the output current and double the output voltage of a a
single unit
KIT 219-0481 is used for 2 parallel connected branches of 3
series-connected units. The six (total) power supplies provide
double the output current and triple the output voltage of a a
single unit
Provides connection to a-c mains via Nema 6-20P connector.
Provides connection to a-c mains via Nema L6-20P locking
type connector.
Contains RJ11 to RJ45 Patch cord, RJ 45 Patch cord, two RS
232 adapters, one with male pins to connect to DTE equipment
and one with female pins to connect to a PC (personal com-
puter), two RS 232 Loop Back test Connectors (one 6-pin and
one 8-pin) to test RS 232 communication and aid in isolating
RS 232 communication problems.
Allows RS 232 port to be connected to DTE equipment. (Sup-
plied in KIT 219-0436.)
Allows RS 232 port to be connected to a PC (personal com-
puter). (Supplied in KIT 219-0436.)
Mating connector for Analog input connector A2A5J6
Mating connector for RS-232 PORT, connector A1J5 and PRO-
TECTION EXT. PORT, connector A2A5J7
Mating connector for PAR/SER PROTECT PORT (IN and
OUT) connectors.
PART NUMBER
142-0527 (Kepco)
SP2501 (CUI Stack)
142-0485 (Kepco)
KMDLA-5P (Kycon Inc.)
SNC 488-1
SNC 488-2
SNC 488-4
KIT 219-0449 (2 in parallel)
KIT 219-0446 (3 in parallel)
KIT 219-0447 (4 in parallel)
KIT 219-0448 (5 in parallel)
KIT 219-0443 (2 in series)
KIT 219-0444 (3 in series)
KIT 219-0480 (2 in series X 2
parallel branches)
KIT 219-0481 (3 in series X 2
parallel branches)
KIT 219-0436
(L-COM RA098M)
(L-COM RA098F)
Dsub 15 pin hood
(Tyco-Amp 207470-1)
Dsub 15 pin male
(Amphenol 17S-DA15P)
(Amphenol 5-555176-3)
(Amphenol 5-555176-3)
118-1087
118-1088
142-0487
142-0506
108-0374
142-0449
142-0536
142-0535
1-17
Advertisement
Table of Contents
