Table of Contents
Advertisement
If Protection type was saved as External, EXT is listed under the Prot heading. In this case the
protection settings are determined by the levels applied to the appropriate pins of the Analog I/O
Input Port (see Table 2-10). If the main channel is voltage, the protection settings are deter-
mined by pin 5 (negative current protection) and pin 13 (positive current protection). If the main
channel is current, the protection settings are determined by pin 6 (negative voltage protection)
and pin 14 (positive voltage protection).
3.3.8.2
VIEWING SAVED SETTINGS
1. Pressing
sisting of a list of locations 1 through 20 arranged in two columns of 10 rows. Use
keys to display additional columns. NOTE: Use the number keys as a shortcut, e.g., press-
ing 4 immediately highlights location 41, showing the column with locations 41 through 50.
U
2. Use the
is highlighted, press
3.3.8.3
SAVING SETTINGS AND ERASING OR MODIFYING PREVIOUSLY SAVED SETTINGS
!
1. Press
2. Use the
memory location, press
!
3. Press
4. Once the details are displayed, use the
BOP HIPWR 080709
FIGURE 3-8.
!
from the power-up screen displays the Saved Setups screen (Figure 3-8) con-
Y
and
keys to highlight the desired memory location; When the desired location
!
. The details of the parameters listed in Table 3-8 are displayed.
from the power-up screen to enter the Saved Setups screen (Figure 3-8).
U
Y
and
keys to highlight the desired memory location; To erase a highlighted
#
. The list will show erased locations as Empty.
to see the details stored in the highlighted location.
SAVED SETUPS MENU
U
Y
and
keys to highlight the desired parameter.
T
R
and
3-23
Advertisement
Table of Contents
