Ieee 488 (Gpib) Bus Command Mode Messages - KEPCO BOP 1000W Operator's Manual

TABLE 3-18. IEEE 488 (GPIB) BUS INTERFACE FUNCTIONS (CONTINUED)
FUNCTION
Device Clear
Device Trigger
Controller
TABLE 3-19. IEEE 488 (GPIB) BUS COMMAND MODE MESSAGES
MNEMONIC
TABLE 3-20. IEEE 488 (GPIB) BUS DATA MODE MESSAGES
MNEMONIC
DAB
END
EOS
RQS
STB
BOP HIPWR 080709
SUBSET
SYMBOL
Complete Capability. BOP accepts DCL (Device Clear) and SDC (Selected Device
DC1
Clear).
DT1 Respond to *TRG and <GET> trigger functions.
C0 No Capability
MESSAGE
DESCRIPTION
ATN Attention
DAC Data accepted
DAV Data Valid
DCL Device Clear
IFC Interface Clear
MLA My Listen Address
MTA My Talk Address
OTA Other Talk Address
RFD Ready for Data
SDC Selected Device Clear
SPD Serial Poll Disable
SPE Serial Poll Enable
SRQ Service Request
UNL Unlisten
UNT Untalk
MESSAGE DESCRIPTION
Data Byte
End
End of String
Request Service
Status Byte
COMMENTS
COMMENTS
Received
Received or Sent
Received or Sent
Received (see PAR. 3.5.3.1.2)
Received
Received
Received
Received
Received or Sent
Received
Received
Received
Sent
Received
Received
COMMENTS
Received or Sent
Received or Sent
Received or Sent
Sent
Sent
3-47