Table of Contents
Advertisement
11
Next, tell your fax to carry out this delayed command one of these ways:
Option 1:
Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2:
Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax should perform the command:
Delayed
Enter Time: 00/17:05
12
Press
,
.
ENTER
ENTER
13
The
now displays the next programmable one-touch key.
LCD
If you do not want to enter or change any other key's programming, press
to return your machine to standby mode.
If you do want to enter or change this key's programming, go back to step 4.
If you want to enter or change another key's programming, go back to step 2.
Programming F-Code polling
For this operation to work, three things must be true:
• The document which you're polling must exist in the remote fax's F-Code box (
standard sub-addressing/password box).
• You must know the remote fax's
box you want to poll.
To program an F-Code polling operating into a programmable one-touch key:
1
Press /
,
, 1,
PROGRAM
C
ENTER
one-touch number available:
Select Program No.
73:No Number Stored
Note: If a programmable one-touch number other than 73 appears on the
, it means that you have already entered a number for 73.
LCD
Note: To erase a programmable one-touch key, refer to pages 2.54–2.55.
on the 30th.")
PM
today.")
PM
-
sub-address and password (if any) for each
ITU
T
. The
shows the first empty programmable
LCD
2
Press the key you want to program or change. Here, we've selected 75.
Select Program No.
75:No Number Stored
Note: If your previous command for this key was for an F-Code polling oper-
ation and you want to keep this key programmed for an F-Code
polling operation, use these instructions to make changes. But if you
want to assign this key to a completely different operation (for a
delayed transmission, for example), then you first must erase the
stored command before programming the new one.
3
To select a different programmable one-touch key than the one that appears
on the
, press that key now.
LCD
4
Press
. The
ENTER
75:Fax#/Com-Options
_
5
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
STOP
be up to 40 characters in length:
75:Fax#/Com-Options
9-5558422_
Your display shows only 20 characters at a time. To view characters beyond
those 20, press
Important: Do not press
Note: To erase characters, press
-
ITU
T
To change just one character in the number, press
sor left, or /
Then re-enter the number correctly.
6
Now, while you can still see the fax number on the
four times and then press
Enter Sub-Address
_
7
Use the numeric keypad to enter the
to poll. Here, we've entered 123456:
Enter Sub-Address
123456_
now shows either:
LCD
75:Fax#/Com-Options
or
9-5558743_
to scroll to the left or /
to scroll to the right.
PROGRAM
.
ENTER
to erase to the left.
CANCEL
to move it right. Press
PROGRAM
, press
LCD
. The
shows:
ENTER
LCD
-
sub-address for the box you want
ITU
T
Beyond the Basics
to move the cur-
to erase it.
CANCEL
-
COM
OPTIONS
2.53
Advertisement
Table of Contents
