Configuring The Snmp Settings - Fujitsu N7100 Operator's Manual

4.7.6 Configuring the SNMP Settings

Set whether or not to obtain the MIB information or enable the trap notification.
For details about configuring the SNMP settings, refer to
1. Select [SNMP Settings] under [Network Settings].
 The [SNMP Settings] window appears.
2. Specify each item.
3. To check whether trap notification is properly sent, press the [Test]
button.
 Trap notification is performed.
4. Press the [OK] button.
4.7 Configuring the Network Settings
Touch
Panel
"SNMP Settings" (page
107
Central Admin
Console
428).